Search: Cce
Results: 4810
Results: 4810
Cce Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
LT29G
|
Reduce LED voltage | Remove r126 and put r8 in place, and connect r3 and r6 in series | Eletronica Cardoso | |
| CCE |
LN24GW
|
Does not tune channels | Defective varicap | BOSCO | |
| CCE |
LN24G
|
The backlite doesn't light up | F6 on the 12volt line open | Replace the same | Multimarcas/Acarí |
| CCE |
STILE D32
|
Switches to green LED but does not turn on | R97a (10r) open and d25 smd shorted | Eletrônica Cecé. Brumadinho MG | |
| CCE |
HPS1497
|
Hitting relay, and with closed vertical | Q802 changed | Replace q802 | MARCONES DE ARARIPINA-PE |
| CCE |
TV2118USP/AV. VER 2.2
|
Does not turn on the off LED voltage only on the primary power supply. | The cause of the defect was the ci cq1265rt | It was replaced for a cq765rt as I didn't have the same one and the TV started working again. | José - AssisTec - Manari-PE |
| CCE |
HPS 1401
|
Doesn't start. It has a power supply but it doesn't oscillate! LED off. | Q 802 ( c337-16 ) | PAULOBORGESELETRORJ | |
| CCE |
LN244
|
Doesn't start | Capacitores ec-1 ec4- e ec-8 | BOSCO | |
| CCE |
LT29G /LT28G
|
The voltage of the LEDs at 44v they work at the limit to decrease to less than 40v | Https://youtu.be/dz0p2erdx7c | Eliel Batista | |
| CCE |
LT29G
|
Burning the LEDs reduces the current | Https://youtu.be/dz0p2erdx7c | Eliel Batista | |
| CCE |
C390
|
Smooth screen only sound | Chap. cd31 shorted on the display board. | Bruno nicacio | |
| CCE |
STILE D32
|
The LED turns to green, no image and the sound goes up to /12e24v and drops immediately afterwards | Carry out a complete resoldering at the power supply | Eletrônica Oliveira | |
| CCE |
STILE D42
|
Normal green LED turns on, the backlight turns on but tsound is no image | Cd39 cap on the v-con next to the connector | Ariel Santos | |
| CCE |
TV 2118USP
SL23-1 |
Turns on dark image with lines without osd | Fr301,10r and a 22r behind the kinescope plate | Replace of both | Rogério TV |
| CCE |
HPS 1471
CHASSI 34BI |
Noise in the flipback crickets noise of crickets more or less like that. and it wouldn't turn on, the led would turn off, after 2 times the led would come on again in standby | I found the ic301 stva and q101 bc337/25 | Replace them and run for the hug | GENILSON |
| CCE |
CCE HPS 1407S
|
Standby flashes not turning on | Open flyback | Replacement close and deliver | |
| CCE |
D4201 STILE
|
Sound comes out when turned on, but the lamps only blink when turned on, if it doesn't solve it by changing the capacitors, remove the cn01 plate and place a +/- 82z resistor between the 000 rj5 and the middle pin of z2 | Https://youtu.be/ax0vabx4yus | Https://youtu.be/ax0vabx4yus sound's the video of the guy who gave the tip | Rodrigo cofferi |
| CCE |
D3201
|
The TV would not turn on and the LED remained flashing orange. | Stand by power supply with the main pci connector connected, the voltage fluctuated at 2.4v, if you released the connector it returned to 5 volts. Cause: PFC capacitor exhausted and the IC also shorted. | Alegrete | |
| CCE |
21AVP
|
High leakage in the tube, even after changing all the capacitors | Clean the tube with a cleaning product, especially wsound the pacifier goes | Clean tube | Leonardo |
| CCE |
21AVP
|
When the deflector coil cables are connected to the board, when turning on the TV, it makes a loud whistle and turns off before the image appears. | Shorted deflector coil | To replace | Leonardo(Deus abençoe a todos ,somos todos filhos de Deus) |