Cce HPS-2171FS TV Repair: Common Faults and Solutions.

Search: Cce HPS-2171FS
Results: 19

Cce HPS-2171FS Repair Guide: Common Issues and Fixes

Repair tips, common issues and fixes.
Brand	Model	Fault	Detailed Problem	Solution	By
CCE	HPS-2171FS	Doesn't start. without +b	C805 sold out	Replace c805 150µ 400v	MARCELO PIRANGA
CCE	HPS-2171FS	Turns on and the LED keeps flashing all the time and no image	After spending a long time on it, I noticed that when I opened the screen, 2 colored lines appeared in the middle of the screen horizontally.	Capacitor c416 close to the horizontal baffle connector	Jailson maia
CCE	HPS-2171FS	LED flashing and no longer turns on b pulsing the bass	In my case it was the 2 caps of + b 33 and 47 uf 160v	Replace	eletronica sto ant rj bahia
CCE	HPS-2185FS HPS-2171FS	Power supply inoperative nor the standby LED lights up after a while it turns on normally @@@	Ic 801 (tea1533at) da power supply		ELETRONICA ARNI-L. LEAL- SC
CCE	HPS-2171FS	Low power supply with blinking LED	Short on the 16v line, ic601 showing very low resistance from pin 7 to ground.	Replace ic601 tda1517	EDSON DE SOUZA AGUIAR
CCE	HPS-2185FS UO HPS-2171FS	Power supply does not start LED does not light b+ov leaves it on for a while the LED lights up the TV turns on normally	Ic 801 (tea1533at) da power supply	Help yourself leave your tip	ELETRONICA ARNI-LEOBERTO LEAL /SC
CCE	HPS-2185FS UO HPS-2171FS	Blinking led	Dz401	Help yourself leave your tip	ELETRONICA ARNI-LEOBERTO LEAL /SC
CCE	HPS-2171FS	I replaced the original flayback (bsc25-0206h) with the one that comes with the tat2104 scheme	I just took out the 47kpf c424 and that was it, the image was normal, but it took a while to turn it on and I realized that the filament was very erased.	I put the 47kpf c424 in its place, I took a turn on the flayback ferrite to increase the voltage of the filament, 3volts, the increaser to 4.5volts, it lit up normally and the TV turned on normally without delay, this is because the flayback was not original, but everything was resolved.	fabiusmax
CCE	HPS-2171FS	I replaced the original flayback (bsc25-0206h) with the one that comes with the tat2104 scheme	Got a saturated shine	I just took the 47kpf c424 and that was it with a normal image	fabiusmax
CCE	HPS-2171FS	Doesn't work, std-by led lights up	Shqqh
CCE	HPS-2171FS	Lose the sound	Replace c650, c647, c652
CCE	HPS-2185FS HPS-2171FS	Power supply inoperative nor the standby LED lights up after a while it turns on normally @@@	Ic 801 (tea1533at) da power supply		ELETRONICA ARNI-L. LEAL- SC
CCE	HPS-2171FS	Low power supply with blinking LED	Short on the 16v line, ic601 showing very low resistance from pin 7 to ground.	Replace ic601 tda1517	EDSON DE SOUZA AGUIAR
CCE	HPS-2185FS UO HPS-2171FS	Power supply does not start LED does not light b+ov leaves it on for a while the LED lights up the TV turns on normally	Ic 801 (tea1533at) da power supply	Help yourself leave your tip	ELETRONICA ARNI-LEOBERTO LEAL /SC
CCE	HPS-2185FS UO HPS-2171FS	Blinking led	Dz401	Help yourself leave your tip	ELETRONICA ARNI-LEOBERTO LEAL /SC
CCE	HPS-2171FS	I replaced the original flayback (bsc25-0206h) with the one that comes with the tat2104 scheme	I just took out the 47kpf c424 and that was it, the image was normal, but it took a while to turn it on and I realized that the filament was very erased.	I put the 47kpf c424 in its place, I took a turn on the flayback ferrite to increase the voltage of the filament, 3volts, the increaser to 4.5volts, it lit up normally and the TV turned on normally without delay, this is because the flayback was not original, but everything was resolved.	fabiusmax
CCE	HPS-2171FS	I replaced the original flayback (bsc25-0206h) with the one that comes with the tat2104 scheme	Got a saturated shine	I just took the 47kpf c424 and that was it with a normal image	fabiusmax
CCE	HPS-2171FS	Doesn't work, std-by led lights up	Shqqh
CCE	HPS-2171FS	Lose the sound	Replace c650, c647, c652