Search: Cce LT32G
Results: 7
Results: 7
Cce LT32G Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
LT32G
GT-1326EX--D292 |
LED current reduction | Change r65 from 1k2 to 6k8 | Ederlin | |
| CCE |
LT32G
GT-1326EX-D292 |
High voltage on the LED causing it to burn | Replace r9 with a higher value, in my case I put 2 15k res in parallel the voltage dropped from 6.2 to 5.9 | eletronica tensao | |
| CCE |
LT32G
|
Don't tune in | Change varicap from another cce board that is a similar model ln32g, etc. | reginaldo moronte,eletronica junior caldas novas | |
| CCE |
LT32G
|
Bus lighting very weak, switch ci voltages normal | Replace q4, with a small leak, heating beyond normal | José Moura | |
| CCE |
LT32G
|
Does not turn on backlight | Altered or open resistor r130 that powers the driver IC | Eletrônica Pauly | |
| CCE |
LT32G
|
If, when you replace the card for another, the image turns upside down | Just replace the flash memory u103 | Reinaldo | |
| CCE |
LT32G
|
Tsound is sound, no image, when turned on the LEDs blink | The voltage of the LEDs is below 54 volts | Test the LED power supply, if it is below 54 volts, replace the EC2 100x160v electrolytic for a new one and just be happy | Paulo Sertel-Itararé SP |