×

Gradiente TV Repair: Common Faults and Solutions.





Search: Gradiente
Results: 1316

Gradiente Repair Guide: Common Issues and Fixes

Repair tips, common issues and fixes.
Brand Model Fault Detailed Problem Solution By
GRADIENTE GT-1410
Does not turn on, power supply pulsing at 1x4 cadence. Rp51 the 110k
GRADIENTE GT-2033
Intermittent operation, sometimes it turns on, sometimes it doesn't.. Ci regulator +5v ic04 kia78l05bp with output voltage below normal Replace the IC regulator +5v ic04 kia78l05bp with output voltage below normal when the defect occurs
GRADIENTE GT-2033
Turns on but with a reduced frame and wrong convergence. Yoke Replace the dse-1992 jl deflector (yoke), failing which, install the cdys-2007a deflector without the need for adjustments.
GRADIENTE TF-2952
No image (sometimes it doesn't turn on) Varicap
GRADIENTE HTM-277
Activating protection Ic c8 d 402(zner 75v) c413
GRADIENTE TV2924-2922-TF2952-VARIOS MODELO IC MICRONA
Dark image Q830
GRADIENTE TV2924-2922-TF2952-VARIOS MODELO IC MICRONA
Turning off by itself Change c805 from 10uf/160v to 47uf/160v
GRADIENTE 3EM1 MS-300
Fm inoperative Ki701 (l1186n)
GRADIENTE TAPE-DECK CD3500
Dead D615, r624 (33 r) e x605 (bd135)
GRADIENTE SINTONIZADOR T1
Signal LEDs on Ic601 (ca3046)
GRADIENTE RECEIVER 1360
Fm with/ som Ci1 (ca3189)
GRADIENTE RECEIVER STR 1050
Left channel distortion T108 e t109
GRADIENTE RECEIVER S-96
Inoperative, fuse open D106 e d107 (spoon 3/20)
GRADIENTE CD PLAYER 5 CD
Poor reproduction Adjustment of the trimpot next to the laser
GRADIENTE CD PLAYER CDP/AT3
Doesn't play the cd Ci tda7073a and optical reader
GRADIENTE AMPLIFICADOR PRO 2000 MKIV
Open fuse Tr4, tr5, tr8, tr9, tr10 and tr11 shorted
GRADIENTE AMPLIFICADOR M246
Inoperative, fuse open Right output transistors and exciters and ci901
GRADIENTE AMPLIFICADOR M120
Dead Bridge rectifier and c134 (5000 µf 35 v))
GRADIENTE 1422/2022/2025
Short the horizontal outlet after 15 or 30 days of use C401 Capacitor c401 de 1mf/160 - 2025 de 2.2/160v
GRADIENTE GBT 2011
Burns horizontal transistor Factory modification Add a 27k // 3w metal film resistor connecting the anode diode d805 to gnd (if there are no resistors in positions r828 and r829). replace the capacitor c805 (100 μF / 160v). the capacitor c808 (470 pf // 1kv)