Gradiente NEXT 29 TV Repair: Common Faults and Solutions.

Search: Gradiente NEXT 29
Results: 12

Gradiente NEXT 29 Repair Guide: Common Issues and Fixes

Repair tips, common issues and fixes.
Brand	Model	Fault	Detailed Problem	Solution	By
GRADIENTE	NEXT 29L	Tv turns on the stan by but it doesn't start when you activate the sw" tok button it makes a tick turns off the led and it comes on again, but it doesn't turn on	Remove what 01 note..everything was ok		ELETRÔNICA IDEAL
GRADIENTE	NEXT 29L	Blurry image looking like socket or lack of negative attention in the vertical.	After discarding the obvious I discovered that by moving the board it returned to normal.	After discarding the obvious, he solved all the SMD components of the vertical circuit and it was ok. the bad contact was in the smd	This email address is being protected from spambots. You need JavaScript enabled to view it.
GRADIENTE	NEXT 29L	Reduced image on the sides	I tried to adjust it in service mode but the adjustment did not work.	27k r316 on ew circuit, open.	luis carlos
GRADIENTE	NEXT 29L	Image with retrace	Ic904 (kinescope board)		AdrianChapadão
GRADIENTE	NEXT 29	Image closed horizontally	Ic302 e r316
GRADIENTE	NEXT 29L	Turns off when changing channels or when entering service mode	Interrupt the track that leaves pin 3 of the power supply transformer to diodes d803 and 802 and solder a double body ferrite coil and that's it.
GRADIENTE	NEXT 29L	Tv turns on the stan by but it doesn't start when you activate the sw" tok button it makes a tick turns off the led and it comes on again, but it doesn't turn on	Remove what 01 note..everything was ok		ELETRÔNICA IDEAL
GRADIENTE	NEXT 29L	Blurry image looking like socket or lack of negative attention in the vertical.	After discarding the obvious I discovered that by moving the board it returned to normal.	After discarding the obvious, he solved all the SMD components of the vertical circuit and it was ok. the bad contact was in the smd	This email address is being protected from spambots. You need JavaScript enabled to view it.
GRADIENTE	NEXT 29L	Reduced image on the sides	I tried to adjust it in service mode but the adjustment did not work.	27k r316 on ew circuit, open.	luis carlos
GRADIENTE	NEXT 29L	Image with retrace	Ic904 (kinescope board)		AdrianChapadão
GRADIENTE	NEXT 29	Image closed horizontally	Ic302 e r316
GRADIENTE	NEXT 29L	Turns off when changing channels or when entering service mode	Interrupt the track that leaves pin 3 of the power supply transformer to diodes d803 and 802 and solder a double body ferrite coil and that's it.