Search: Mitsubishi TC2010
Results: 14
Results: 14
Mitsubishi TC2010 Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI |
TC2010
|
Bad sound on the channels. like it's out of tune. in av normal sound. anomaly in the sound only in the channels. | Capacitor c304 de 1mf/50v. | If you pick it up, the sound improves. By changing it, it solved the problem. | Romildo Behrend |
| MITSUBISHI |
TC2010
|
Cold solder on york cable horizontal output shorted and kinescope cut off toasted 10k abl resistor | After replacing the defective components, the image had little contrast, as I checked the abl line and tsound was nothing bad, I concluded that the tool was damaged. | I disconnected pin 10 of the ci, everything was done, the image was normal | Evandro/sousa astel eletonica ceara |
| MITSUBISHI |
TC2010
|
Does not turn on, LED is off. | It doesn't have 5v | Bad contact on pin 9 of t901 | Evandro Estrela |
| MITSUBISHI |
TC2010
|
Vertically closed, touch the plate to open it, but the light streak is tortuous, suggesting that it was the deflector coil | Poor contact in the connection socket with the vertical deflection coil. | It was resoldered and it was ok | Armando de Olimpia Eletronica EvoluSom. |
| MITSUBISHI |
TC2010
|
Normal power supply, but without generating high (oscillate). | T552 (horizontal driver) with open primary coil. | CARLOS MAIA | |
| MITSUBISHI |
TC2010.
|
The LED only lights up but does not start. | Due to cold soldering in c 952 and c 954, c-962 =100x16v burst. | A 100x25v capacitor was placed in place of c9562 and c952 and c954 was just resoldered and the TV was ok. | Armando da Eletrônica só Tv. |
| MITSUBISHI |
TC2010
|
Tsound is a power supply but tsound is no high and with resistor 573 it heats up a lot. | I replaced the 573 ceramic capacitor and everything worked. | Alvanyr | |
| MITSUBISHI |
TC2010
|
High power supply | He softened | Carlos | |
| MITSUBISHI |
TC2010
|
Does not turn on, LED is off. | It doesn't have 5v | Bad contact on pin 9 of t901 | Evandro Estrela |
| MITSUBISHI |
TC2010
|
Vertically closed, touch the plate to open it, but the light streak is tortuous, suggesting that it was the deflector coil | Poor contact in the connection socket with the vertical deflection coil. | It was resoldered and it was ok | Armando de Olimpia Eletronica EvoluSom. |
| MITSUBISHI |
TC2010
|
Normal power supply, but without generating high (oscillate). | T552 (horizontal driver) with open primary coil. | CARLOS MAIA | |
| MITSUBISHI |
TC2010.
|
The LED only lights up but does not start. | Due to cold soldering in c 952 and c 954, c-962 =100x16v burst. | A 100x25v capacitor was placed in place of c9562 and c952 and c954 was just resoldered and the TV was ok. | Armando da Eletrônica só Tv. |
| MITSUBISHI |
TC2010
|
There is a power supply but there is no high and with resistor 573 it heats up a lot. | I replaced the 573 ceramic capacitor and everything worked. | Alvanyr | |
| MITSUBISHI |
TC2010
|
High power supply | He softened | Carlos |