Search: Aiwa
Results: 308
Results: 308
Aiwa Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| AIWA |
AWS-TV-55-BL-01
|
No image | Defect in the LED bars = 3 bars with 11 3V LEDs each measuring 105.8 cm long | I didn't find it in Brazil, I had to import a model equivalent to the Philco TV model PTV55G20 and PTV55G20AGS other codes LED strip lamp for Skyworth, 55suc6500, th-55hx560c, 55d11-zc62ag-04d, sw55d11-zc62ag-02, 5800-w55g22-0p00, 55d3b11cx106012 | You tube - Direto no defeito |
| AIWA |
AW42B4SM
|
Increasing the volume alone | Processor heating up abnormally, if you pour isopropyl alcohol on the processor and cool it the defect normalizes | Replacing the processor or board | LEANDRO VOSS |
| AIWA |
ZR900
|
Plays the CDs normally but sometimes it opens the tray alone if it is stopped without any function then it stays in direct shelter | Micro keys on the CD plate that is on the CD mechanics, change or clean them | ||
| AIWA |
ZR900
|
Complement no sound on the tape deck b even with two speakers and increasing the volume to maximum, the tabe a only has sound on one normal channel, the other works very quietly | Defect in ic302 (cxa1553p) just change it and go for the hug | ||
| AIWA |
ZR900
|
Carrocell doesn't spin and CD doesn't work | 33r resistor open or changed, the value must be 33r, located on the CD board and connected to the 11 or 12 v power supply | ||
| AIWA |
ZR900
|
No sound and all functions | Transistor a114 defective it releases voltage to the 60 v power supply relay if the power supply is not recognized at the beginning of the device fertilization it will not produce sound | Just replace it and that's it | |
| AIWA |
NSX-S22
S22LH |
No sound, display goes on and off | Exchanging outputs d2495 and b1626 and peak fuse pr202 | Shorted outputs due to use in low impedance and open fuse peak. | Rocha Disco & Eletrônica |
| AIWA |
CA-W37
|
Very low and distorted sound in all functions. | IC701 (LA4550) Replacement | MURIEL RAMOS | |
| AIWA |
CX-NS909HR
|
I'm sound | Transistor q601(open) audio processor power supply | Eletro Zica | |
| AIWA |
AR-295
|
TV doesn't turn on--tsound is no 9.3v power supply | One of the 4k7 resistors in the resistive divider--130v--32v open | Check line voltage value 32 v,and it was, | KLEEUS |
| AIWA |
AR-295
|
Power supply does not provide 9.3v at the q802 emitter | Q 892-bc 337]16 | 10v zener from collector to emitter of q 802, clamping 9.3v at the point, | KLEEUS |
| AIWA |
NSX-S229
|
When you press the button to turn on the display turns off and does not turn on. | Check r223, r224, r249 and r250. Possibly, one of them may be open, due to some problem with the audio output. | MARCONES DE ARARIPINA-PE | |
| AIWA |
NSX-S229
|
Nothing turns on, display is off | Loosen resistor r244 and see if when plugged in, the display lights up. If it lights up, check the output transistors. | MARCONES DE ARARIPINA-PE | |
| AIWA |
CXNF 9 LH
CXNF |
When I plug it in, the PC turns on by itself and doesn't turn off. | What can it be | Renato | |
| AIWA |
CX-JN77
AIWA CX-JN77 |
Turns on and activates the protection and turns off, the red LED flashes | R477 and r496 are open follow the scheme https://www.mediafire.com/file/2p65e90lbmj9dm3/aiwa+cx-jn77.pdf/file | Replace the 100Ω r477 and r496, they are open, follow the diagram | neupsx4 |
| AIWA |
CX-JN77
AIWA CX-JN77 |
Turns on and activates the protection and turns off, the LED flashes red | R477 and r496 are open follow the scheme https://www.mediafire.com/file/2p65e90lbmj9dm3/aiwa+cx-jn77.pdf/file | Replace the 100Ω r477 and r496, they are open, follow the diagram | neupsx4 |
| AIWA |
Z-R990
|
I'm sound | Resistor 105 changed, no voltage on the hold sw line. | Replaced the resistor, sound worked normally. | Mac |
| AIWA |
NSX-F15
|
Scrambled display | The voltage at q351 was wrong, it should be -30v at the emitter and it was 1.7v, I replaced it and it resolved it! | Robsonbis | |
| AIWA |
NSX-F15
|
Does not turn on, LEDs blink | I resoldered crystal below the first display on the right. | Top Consertos | |
| AIWA |
NSX-SZ510
|
Red LED doesn't turn on | Altered q-130 | samuel leite |