Search: PTV55Q20
Results: 2
Results: 2
PTV55Q20 Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO |
PTV55Q20
|
No image, backlight on and screen slightly bluish due to the brightness of the LEDs. | Def. on one side | Follow the tips on the forum, disconnect one of the flat cables from the t-con, (attention you will need to make a continuity jammer from the r354 to the other side, the r351 in the r354 leaves 12v and enters the r351, you have to pass through it if it doesn't burn at t -con , after the repair, keep the jamper and. | valdir ,Macajuba-Ba |
| PHILCO |
PTV55Q20SNBL
|
Plug it into the socket and the standbay LED blinks slightly and goes out | Cold solder not bga | Reballing | Marivaldo |